Tips For Replacing a Window Handle
It is easy to replace your window handle from the at-home comforts of your home. Follow these handy tips for a smooth operation and great appearance.
Start by removing the screws to expose the screws within the uPVC window handle. Then, measure the length of the spindle to ensure that you receive the correct size replacement.
1. Determine the length of the Spindle.
It's important that you get the spindle size right when replacing windows handles. This is because it could determine how tight or loose the handle is and whether it locks correctly within the frame of the window. The spindle is the steel shaft that connects to the handle and to the lock in the frame of the window. The spindle can be either a standard industry 8mm cross-section or the earlier 9mm versions. Modern industry standards are 8mm, but it wasn't always the case. It is essential to verify the measurements prior to buying the handle you want to purchase.
The easiest method of measuring the length of the spindle is to remove the handle that is currently in place and this can be done by turning it into the open position, then unscrewing the two screws (which might be hidden behind plastic caps that will need to be removed) that hold the handle. Once removed take a measurement from the base of the handle to the end of the spindle. This will give you the measurements needed to buy a replacement.
There are a lot of choices when it comes to choosing the right window handle from sleek chrome that blends into modern homes to traditional brass with a burnished finish that looks great in restored Georgian rooms or even the more quaint Tudor cottages with curled monkey tail locks! The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are generally installed to uPVC windows and are always identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm to 62mm. door handles repair near me handles from Cadenza are a different size again as they have an angled blade that functions an interlocking mechanism that is multi-point inside the window.
When selecting a window handle take into consideration the hand you use to open your door. Inline window handles aren't hand-operated and can be used on right or left handed windows. Cranked window handles are hand-operated and can only be used on windows that open in only one direction.
2. Remove the Handle
A window handle that falls out can be frustrating, regardless of whether the handle is damaged or worn out. But the good news is that replacing a uPVC window handle is a very easy task that you can complete yourself. You will require only the most basic hand tools as well as some time to complete the process.
The first step is to must open the window and make sure that it is in an unlocked position. Next, you need to remove the screw caps which hold the handle in position. Once the screw caps have been removed you will be able remove the handle.
The handle itself is attached to a spindle in the window frame. Depending on the type the handle is held in place by a screw or a pin. The most popular handles are the inline Espagnolette and the cockspur handles. Both types of handles are found on casement windows, as well as aluminium ones. You can lock the handles with a key in order to block access by unauthorised persons from the outside. You can also lock the handles by turning them clockwise.
To take the handle off, you will need a flat-bladed screwdriver. After the clip has been released, the handle should slide off the spindle. Once the old handle has been removed, you'll have to determine the length of the spindle and ensure that the new handle will fit.
Once you have the proper size, you can now screw the new handle in the correct position. It is crucial to make sure that the handle is properly attached and that it is rotating in the correct direction (clockwise if the handle is open and counterclockwise if handle is closed). It is crucial to make sure that the handle has not been installed upside down.
Replace the screw caps. After you've done that, you can test the handle to make sure that it functions correctly. Also, you should test the locking mechanism by moving the handle to the locked position and then back to the locked position.
3. Take the Screws off
A uPVC window handle is an integral element of any home and is usually the first thing to begin to show signs of wear and tear or damage. This can be caused by natural factors or through regular use and sometimes even deliberate damage by opportunistic criminals who might wish to open a locked window and gain access to your property. A simple fix can resolve the issue and prevent it from happening again.
uPVC handles could also be difficult to remove when the locking mechanisms are not functioning correctly. Often, the problem can be resolved by replacing the multipoint lock rather than the entire handle and it's worthwhile to check this out since it can save you money.
After you've removed the old handle, you'll have to take off the screws that were that held it in place. They are usually located on the inside face of the base of the handle. It is possible to use a screwdriver accomplish this. Be cautious not to over tighten the handle as this could cause it to loosen.
The next step is to locate the fixing screws or pins that hold the new handle in the correct position. They will likely be found on the inside of the handle base and you will need to use an screwdriver or a pair of pliers to remove the screws. If you wish to, you can replace the caps on the screw and test the handle to ensure it functions correctly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then, screw it in. If you're looking to replace the screws make sure that the handle is in a slack position and that any screws are securely secured. Then you can enjoy the new window handle. This should allow you to avoid costly door and window replacements in the near future. If you would like more help with this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the New Handle
If you're replacing a damaged handle or simply making it more modern, the process is surprisingly simple and can be completed in just a few steps. The first step is to determine the type of handle, measure its spindle and identify the tools you'll need to complete the job. Safety is always the top priority when working with tools and windows. Make sure you follow the steps and make sure that you have the right handle for use.
The first step is to find the screws that hold your existing window handle in place. Then, remove these, whilst keeping an adequate grip on the handle itself to stop it from falling suddenly and injuring yourself. Once the screws are removed, you can place them in a safe location to be replaced later.
After you have removed the handle, you are now able to put in your new one. The handle should be fitted perfectly for it to function properly and secure the window in its closed position. The next step is to slide the square metal bar to the back of the handle into the hole in the window mechanism, ensuring that it is securely in place.
The final step is to replace the caps on the screws and then test the handle to make sure it works. If you aren't satisfied with the result or if your window does not open or close correctly Contact our experts for assistance.
The majority of homes in the UK have uPVC windows, and as such, many of them will have to be replaced at some point because of wear or damage. Anyone with a little DIY knowledge can complete the task. The most important aspect in the success of the procedure is making sure you're using a replacement handle that matches the window's dimensions and style. If you're not sure about the kind of handle you'll require, please get in touch with our team who will be able to guide you through the options available.